LSIS XBE-DC08A, Руководство пользователя, Страница: 931 / 1284

Chapter 1 Built-in FEnet communication
1-52
Buil
t-
in
Comm
(7)
Data type
It defines the data type that will be processed by the blocks. In the case of XGT, it is possible to process
data of bit, byte, 2 bytes (1word), 4 bytes (double word), 8 bytes (long word).
(8)
Number of variables
It can be defined only when you choose Individual Read. It determines the number of areas to be read
individually and in the case of XGT, you can choose them up to 4.In the case of Modbus, it is fixed as 1.
(9)
Data size
It defines the size of the data to be read when you choose Sequential Read and the data size is different
depending on the data type.
(10)
Frame
You can select the relevant frame (group) setting that will perform communication when defining the
user frame.
(11)
Setting
You can designate the memory area to be transmitted∙received when setting XGT client or user
definition. For transmission, as shown in the below figure, designate the area that will save the area
(M0000) to be transmitted and the received data from the opposing station.