LSIS XBE-DC08A, Руководство пользователя, Страница: 926 / 1284

Chapter 1 Built-in FEnet communication
1-47
Buil
t-
in
Comm
Buil
t-
in
2) P2P channel
The Ethernet P2P channel is used When the PLC is operated as Master by using XGT FEnet’s built-in
protocols or when the PLC should communicate through user-defined protocols
<Example of using P2P channel information>
(1)
P2P channel setting
The built-in FEnet can transmit and receive the data by using the maximum of 4 channels and the
channel is composed of the IP address and port number of the communication device.
The number of available channels in P2P is the number that subtracts the number of dedicated
accesses in the basic parameter from the total number of channels (4). (Number of P2P channels=4–
number of dedicated accesses)
For user convenience, P2P allows the communication with the devices using XGT, Modbus TCP
protocols by setting simple parameters. For communication with other devices, it provides the function
of user-defined frames. In addition, a user can register the message and mail address to transmit and
receive the E-mail frame. (It supports ASCII)
However, you do not need to set the channels for E-mail communication. If you choose the P2P
channel in the window for P2P setting, the below window will pop up.