Background
Remote
Service
Verificati
on
Method
Function
Description
PPPoE
dialup
emulation
An ONT simulates a PPPoE user
terminal software to perform
dialup and interact with the BRAS
to verify the connectivity between
the ONT and BRAS.
l
PPPoE dialup emulation requires a
service flow which does not belong to
a QinQ VLAN.
l
A user name, password, and
authentication mode must be
configured on the BRAS for the PPPoE
dialup emulation.
l
An ONT supports a maximum of a
PPPoE dialup emulation.
Call
Emulation
An ONT simulates a voice user to
make a call to check whether the
voice service data is correctly
configured. You can also use the
call emulation function to locate a
fault when the voice service is
faulty.
l
An ONT can simulate a caller or callee
to communicate with a phone in a call.
In this case, only a functional phone is
required in the central office where the
acceptance personnel is.
l
An ONT supports a maximum of a call
emulation.
Multicast
emulation
This function enables you to
simulate a multicast user going
online and lead the program
stream to an ONT. You can check
whether the multicast service is
normal by checking the real-time
traffic of the multicast program.
Multicast services configured in the
dynamic controllable multicast mode do
not support this function.
Data plan
Item
Data
Remarks
PPPoE
dialup
emulation
parameters
PPPoE user name: test@huawei
Password: test
The user name, password, and
authentication mode for the emulation test
must be configured on the BRAS. The
entered user name, password, and
authentication mode must be consistent
with those configured on the BRAS.
Call
emulation
parameters
ONT POTS ID: 1
The default values are used. You can run
the
display pots emulational
configuration
command to check the
parameter values.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9 FTTH Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
625
