Data to be saved includes database files and configuration files.
commands and functions of auto-save operations.
Table 1-44
Auto-save operations
Auto-save
Command
Function
Set the auto-save file type.
autosave type { all |
configuration | data }
l
data: Saves only
database files.
l
configuration: Saves
only configuration files.
l
all: Saves both database
files and configuration
files.
Save database files
automatically at the preset
time.
autosave time
l
The system saves data at
the preset time.
l
By default, the system
automatically saves data
at 00:00:00 every day.
Save database files
automatically at an interval.
autosave interval
l
The system
automatically saves data
at a preset interval.
l
By default, the system
saves database files at an
interval of 30 minutes.
NOTE
l
By default, the
autosave interval
function is disabled in the system. That is, the system does not
automatically save data. Hence, you need to manually save data.
l
When the
autosave interval
function is enabled, you still can manually save data.
l
If data is saved frequently, the system will be affected. Therefore, it is suggested that you set the auto-
save interval to longer than 60 minutes. It is better to set the auto-save interval to equal to or longer than
one day.
l
Before upgrading the system, run the
autosave intervaloff
or
autosave timeoff
command to disable the
auto-save function to prevent upgrade failure due to the conflict between upgrade and auto-save
operations.
NOTICE
After the system upgrade is complete, you must re-enable the auto-save function if the auto-save function
is required.
l
Configure an auto-backup server.
An auto-backup server backs up data, configuration, and logs of a device to an external server.
After an auto-backup server is configured, you can configure the auto-backup function.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
132
