l
Configure queue scheduling.
According to quality of service (QoS) planning principles, all packets are scheduled in strict
priority (SP) mode and mapped to queues according to the packets' priorities. For details
about QoS planning principles, see
11.2.2 Principle of QoS Data Plan
huawei(config)#
queue-scheduler strict-priority
huawei(config)#
cos-queue-map cos0 0 cos4 4 cos5 5 cos6 6
l
Configure system security.
–
Enable deny of service (DoS) anti-attack on both the OLT and optical network units
(ONUs).
1.
Run the
security anti-dos enable
command to globally enable DoS anti-attack.
2.
Run the
security anti-dos control-packet policy
command to configure a
protocol packet processing policy that will be used when a DoS attack occurs.
3.
Run the
security anti-dos control-packet rate
command to configure the
threshold for the rate of sending protocol packets to the CPU.
–
Enable IP address anti-attack on both the OLT and ONUs.
Run the
security anti-ipattack enable
command to enable IP address anti-attack.
l
Configure user security.
–
Enable MAC address anti-flapping on both the OLT and ONUs.
Run the
security anti-macduplicate enable
command to enable MAC address anti-
flapping.
–
Enable MAC address anti-spoofing on both the OLT and ONUs.
1.
In global config mode, run the
security anti-macspoofing enable
command to
globally enable MAC address anti-spoofing.
2.
Enable MAC address anti-spoofing at VLAN level in global config mode or
service profile mode:
a.
In global config mode, run the
security anti-macspoofing vlan
command
to enable MAC address anti-spoofing.
b.
Perform the following operations to enable MAC address anti-spoofing in
service profile mode:
a.
In global config mode, run the
vlan service-profile
command to create
a VLAN service profile.
b.
Run the
security anti-macspoofing enable
command to enable MAC
address anti-spoofing at VLAN level.
c.
Run the
commit
command to make the profile configuration take
effect.
d.
Run the
quit
command to quit the VLAN service profile mode.
e.
Run the
vlan bind service-profile
command to bind the created VLAN
service profile to a VLAN.
3.
(Optional) Run the
security anti-macspoofing max-mac-count
command to set
the maximum number of MAC addresses that can be bound to a service flow.
4.
(Optional) Run the
security anti-macspoofing exclude
command to configure
the types of packets for which MAC address anti-spoofing does not take effect,
such as Internet Group Management Protocol (IGMP) packets.
–
Enable IP address anti-spoofing on ONUs.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
916
