Oriental motor ASD10A-K, Руководство по эксплуатации

Страница: 1 / 52

HG-8032-4
Hollow Rotary Actuators
DG
Series
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
• Please read it thoroughly to ensure safe operation.
• Always keep the manual where it is readily available.
Table of contents
1
Introduction .................................. 2
2 Safety precautions ....................... 5
3 Precautions for use ...................... 8
4 Preparation..................................11
4.1 Checking the product................... 11
4.2 Combinations of actuators and
drivers.......................................... 11
4.3 Names and functions of parts...... 12
5 Installation .................................. 14
5.1 Location for installation................ 14
5.2 Installing the actuator .................. 15
5.3 Securing the load to the output
table............................................. 16
5.4 Permissible moment load and
permissible thrust load................. 17
5.5 Installing the driver ...................... 18
5.6 Installation of home-sensor set
(sold separately) .......................... 19
5.7 Installing and wiring in compliance
with EMC Directive ...................... 23
6 Connection ................................. 26
6.1 Connection example....................26
6.2 Connecting to the power supply ..29
6.3 Connecting the actuator ..............30
6.4 Connecting control input/output...31
6.5 About control input/output............33
6.6 Timing chart .................................39
7 Setting ........................................ 40
7.1 Resolution....................................40
7.2 Pulse-input mode.........................41
7.3 Operating current.........................42
7.4 Speed filter...................................43
8 Protective functions .................... 44
8.1 Descriptions of protective functions
and numbers of LED blinks .........44
8.2 How to clear a protective
function ........................................45
9 Inspection ................................... 46
10 Troubleshooting and remedial
actions ........................................ 47
11 Options (sold separately)............ 50