Oriental motor ASD10A-K, Руководство по эксплуатации

Страница: 31 / 52

6 Connection
－ 31 －
6.4 Connecting control input/output
Assembling the control input/output connector
Solder the control input/output cable (AWG28: 0.08 mm
2
or more) to the connector (36 pins). Assemble the
connector and cover with the supplied screws. For the pin
assignments, refer to page 32.
We provide optional driver cable allowing one-touch
connection with a driver, as well as connector-terminal
block conversion unit (sold separately). Refer to page 50
for details.
Connector pin
•
Assembling the connector and the cover
1.
Attach the supplied screws
(two pieces) to the cover and
insert the connector with the
control input/output cable
soldered to it.
Adjust the cable clamp to its
correct position.
Control input/
output cable
Cable clamp
Screw (M2)
Screw
Cover
Connector
Place the spring
washer outside
the cover.
Align the washer in the
depression in the cover.
2.
Attach the other cover and clamp both
connector covers together with screws
and nuts.
Tightening torque: 0.5 to 0.55 N·m
(71 to 78 oz-in)
Screws (M2.5)