Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1443 / 2620

configure stacking slot-binding
ExtremeWare 7.7 Command Reference Guide 1443
configure stacking slot-binding
configure stacking slot-binding <slot number> <mac addr> module <switch
model> [priority <number>]
Description
Binds the current slot number to MAC address of the switch in the stack.
Syntax Description
Default
NA
Usage Guidelines
Use this command to ensure proper binding of the MAC address to a slot ID when the configuration is
being uploaded to a TFTP server for reuse. When the configuration is downloaded from the TFTP
server, the stack manager can update the MAC address binding for the members and properly assign
the slot numbers and restore the stack.
NOTE
This command should be used only in a configuration upload-download scenario. The command should
not be used through CLI.
This command can also be helpful for pre-staging , where multiple stacks exist that have identical
configurations. In this case, the uploaded configuration can be modified with the proper MAC-address
for the specific stack and downloaded.
Example
The following example binds MAC address
00:04:96:1F:88:21
to slot 3, a Summit 300-24:
configure stacking slot-binding 3 00:04:96:1F:88:21 module s300-24
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
slot number Specifies to bind the switch with this slot ID to the MAC address.
mac addr Specifies the member’s MAC address being bound to the slot.
switch model Specifies the Summit model number for the member. Valid entries are:
S200-24, S200-48, S300-24, S400-24t, S400-24p, S400-48t.
priority <number> (Optional) Specifies the current priority of the slot.