Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 2387 / 2620

show inline-power
ExtremeWare 7.7 Command Reference Guide 2387
— Needs calibrating—Firmware downloaded properly or is up and running, but values stored in
EEPROM are invalid. The unit should be returned to Extreme Networks Service for recalibration.
— Image not found—No firmware image found.
— Version mismatch—Firmware version does not match what the system expects for this particular
ExtremeWare release.
— Invalid—Firmware was corrupted. Repeat the firmware download.
Example
The following command displays inline power status for the system:
show inline-power
Following is sample output from this command:
Inline Power System Information
System maximum inline-power: 32 watts
Power Usage: 70% (22 watts)
Slot Main PSU Status Backup PSU Status Firmware Status
1 OFF Present, ACTIVATED Operational
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.