Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1393 / 2620

show wireless ports debug-trace
ExtremeWare 7.7 Command Reference Guide 1393
show wireless ports debug-trace
show wireless ports [all | <portlist>] debug-trace {detail}
Description
Displays whether debug-trace is enabled on one or more ports.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to review the debug-trace status on a port.
Example
The following example displays a summary report of the status of debug-trace on all wireless ports:
show wireless ports all debug-trace
The output of the command is similar to:
Wireless Port : 1:8
Messages Sent : 0
Total Bytes Sent : 0
Messages Suppressed : 278409
Other Errors : 0
Trace Description CUR MSGS BYTES SUPP
-----------------------------------------------------------------------------
dot1x 802.1x Processing 0 0 0 69058
radius Radius Backend 0 0 0 0
mac Wireless MAC 0 0 0 34
snmp SNMP Subagent 0 0 0 1980
wlan-driver WLAN Driver 0 0 0 0
eth-driver ETH Driver 0 0 0 0
ap-scan AP Scan 0 0 0 46
client-diag Client Diag 0 0 0 6
mac-radius MAC Radius 0 0 0 0
wpa WPA State Machine 0 0 0 207152
iapp IAPP 0 0 0 133
Wireless Port : 1:25
Messages Sent : 0
Total Bytes Sent : 0
all Specifies all active ports.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
detail Displays all the available information.