Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1382 / 2620

1382 ExtremeWare 7.7 Command Reference Guide
Wireless Commands
show wireless ap-scan results
show wireless ap-scan results {detail}
Description
Displays a switch-wide, correlated view of the results of the access point (AP) scan.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to see the results of an AP scan. Use the optional keyword,
detail
, to see all of the
fields in Table 25.
Example
The following command displays information about the AP scan.
show wireless ap-scan results
The output from the command is similar to:
AP Mac Address Intf ESS Name AvgRSS Type Chan WEP WPA Last
detail This optional keyword, provides more in-depth information.
Table 25: AP Scan Results (Alphabetized)
Data Value Description
APMAC MAC address of the discovered AP
Capability Capability field from a received information packet (in detail output only)
Channel The channel on which this AP was discovered
ESS Name String ESS ID I.E.
Last Update Time value at which this entry was updated
Min/Max/Avg RSS Received Signal Strength statistics
Network Type Ad-hoc or BSSID network (in detail output only)
Number of beacons Count of beacon packets seen from this AP (in detail output only)
Number of probe resp Count of PROBE RESP packets sent from the AP (in detail output only)
Supported Rate Set List of supported rates
WEP required/WEP
authentication supported WEP information from beacon and probe packets
WPA WPA information, including authentication and supported encryption algorithms