Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1873 / 2620

enable isis originate-default
ExtremeWare 7.7 Command Reference Guide 1873
enable isis originate-default
enable isis [level-2 |
area <isis area identifier>
] originate-default
{always} cost <cost(0-4261412864)> type [internal | external]
Description
Enables the origination of a default route from a system into the level 1 area or level 2 subdomain.
Syntax Description
Default
The default setting is disabled.
Usage Guidelines
When the
always
option is specified, the default route is originated even if there is no default route in
the kernel routing table. Otherwise the default route will be originated only if the default route is
available in the kernel route table.
Example
The following command enables the origination of an IS-IS default route that uses the internal metric
type and a cost of 15 for the level 2 subdomain:
enable isis level-2 originate-default cost 15 type internal
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the “i” series platforms only.
level-2 Specifies the level 2 subdomain.
isis area identifier Specifies a level 1 area identifier
always Specifies that the default route is always originated.
cost Specifies a cost from 0 to 4,261,412,864.
internal Specifies an internal metric type.
external Specifies an external metric type.