Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1341 / 2620

configure wireless ports interface wireless-bridging
ExtremeWare 7.7 Command Reference Guide 1341
configure wireless ports interface wireless-bridging
configure wireless ports <portlist> interface [1 | 2] wireless-bridging [on
| off]
Description
Enables or disables the interface as a bridge for wireless clients.
Syntax Description
Default
On (enabled)
Usage Guidelines
Wireless bridging on an Summit 300 switches allow wireless users within the same VLAN to
communicate with other wireless users on the same switch using layer 2 bridging. Wireless bridging
can be enabled or disabled for each interface of the wireless port, and the setting is locally significant on
each Altitude 300 wireless port. This setting does not prevent bridging between wired and wireless
MAC addresses in the same VLAN or between remote wireless stations associated with a remote
Altitude 300 wireless port.
Example
The following command disables bridging interface 2 on port 1:15 on a Summit 300-48:
configure wireless port 1:15 interface 2 wireless-bridging off
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
on Specifies that the indicated interface is enabled. When enabled, wireless clients on the same
interface are able to communicate.
off Specifies that the indicated interface is disabled. When disabled, wireless clients on the same
interface cannot communicate.