Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 934 / 2620

934 ExtremeWare 7.7 Command Reference Guide
Security Commands
configure security-profile wpa-only
configure security-profile <name> wpa-only [on | off]
Description
Prohibits use of wpa2 when wpa is selected as the network-authentication algorithm (see “configure
security-profile dot11-auth network-auth encryption” on page 919).
Syntax Description
Default
The default setting is
off
.
Usage Guidelines
This command is generally not required, because the default behavior permits both WPA and WPA2
security. Configuring the
on
option for the command may be required to pass the WPA2 system
interoperability test.
Examples
The following command sequence configures WPA security with AES encryption and forces only WPA
to be used (not WPA2):
configure security-profile secure1 dot11-auth open network-auth wpa encryption aes
configure security-profile secure1 wpa-only on
History
This command is first introduced in ExtremeWare 7.4.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
name Specifies name of the security-profile.
on Prohibits use of wpa2 when wpa is selected as the network authentication
algorithm.
off Permits use of WPA2 in addition to WPA when WPA is selected as the
network authentication algorithm.