Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 725 / 2620

configure sys-recovery-level
ExtremeWare 7.7 Command Reference Guide 725
For ExtremeWare 6.1, the system always reboots after a task exception when the system recovery level
is specified as
all
or
critical
.
For ExtremeWare 6.2 or later, you must specify whether the system should shut down or reboot upon a
task exception if the recovery level is
all
or
critical
.
For BlackDiamond Switches. For ExtremeWare 6.2.2 or later, if
msm-failover
is specified on a
BlackDiamond switch and there is a software exception on the master MSM, the interrupt handler
triggers the slave MSM to take over control of the switch.
Examples
The following command configures a switch to reboot after a critical task exception occurs:
configure sys-recovery-level critical reboot
The following command configures the Master MSM to failover to the Slave MSM if a software
exception occurs:
configure sys-recovery-level critical msm-failover
History
This command was first available in ExtremeWare 6.1.
Modified in ExtremeWare 6.2 to support the
shutdown
and
reboot
options.
Modified in ExtremeWare 6.2.2 to support the
msm-failover
option.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
Modified in ExtremeWare 7.2e to support the
shutdown
and
reboot
options.
Platform Availability
This command is available on all i -series switches. The
msm-failover
option is available on the
BlackDiamond switch only.