Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1197 / 2620

configure debug-trace ipxrip-route
ExtremeWare 7.7 Command Reference Guide 1197
configure debug-trace ipxrip-route
configure debug-trace ipxrip-route <debug level>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also
record the messages recorded at lower levels.
Example
The following command sets the reporting level for IPX RIP route errors to 2:
configure debug-trace ipxrip-route 2
Following is the log output at this level:
<DBUG:XRIP> Added route to net f0220666 g/w f0001964:00:01:30:32:8d:00, hops 2, tics 2
<INFO:SYST> Log cleared
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on ”i” platforms only.
debug level Specifies a debug level:
0 — None.
1 — None.
2 — Displays route additions and deletions.
3 — No additional information recorded.
4 — No additional information recorded.
5 — No additional information recorded.