Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 686 / 2620

686 ExtremeWare 7.7 Command Reference Guide
Commands for Status Monitoring and Statistics
configure log filter events match
configure log filter <filter name> [add | delete] {exclude} events [<event
condition> | [all | <event component>] {severity <severity> {only}}] [match
| strict-match] <type> <value> {and <type> <value> ...}
Description
Configures a log filter by adding or deleting a specified set of events and specific set of match
parameter values.
Syntax Description
Default
If the
exclude
keyword is not used, the events will be included by the filter. If
severity
is not
specified, then the filter will use the component default severity threshold (see the note on on page 684
when
delete
or
exclude
is specified).
Usage Guidelines
This command controls the incidents that pass a filter by adding or deleting a specified set of events
that match a list of <type> <value> pairs. This command is an extension of the command
configure
log filter events
, and adds the ability to filter incidents based on matching specified event
parameter values to the event.
See the
configure log filter events
command on page 683 for more information about specifying
and using filters, event conditions and components, and the details of the filtering process. The
discussion here is about the concepts of matching <type> <value> pairs to more narrowly define filters.
Types and Values.
Each event in ExtremeWare is defined with a message format and zero or more
parameter types. The
show log events detail
command on page 804 can be used to display event
filter name Specifies the filter to configure.
add Adds the specified events to the filter.
delete Removes the specified events from the filter.
exclude Excludes events matching the filter.
event condition Specifies the event condition.
all Specifies all events.
event component Specifies all the events associated with a particular component.
severity Specifies the minimum severity level of events (if the keyword
only
is omitted).
only Specifies only events of the specified severity level.
match Specifies events whose parameter values match the <type> <value> pair.
strict-match Specifies events whose parameter values match the <type> <value> pair, and possess all
the parameters specified.
type Specifies the type of parameter to match
value Specifies the value of the parameter to match
and Specifies additional <type> <value> pairs that must be matched