Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1891 / 2620

enable rip export cost
ExtremeWare 7.7 Command Reference Guide 1891
enable rip export cost
For “i” series switches:
enable rip export [direct | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | static | vip] cost <number> {tag <number>}
For “e” series switches:
enable rip export [direct | ospf | ospf-extern1 | ospf-extern2 | ospf-inter
| ospf-intra | static] cost <number> {tag <number>}
Description
Enables RIP to redistribute routes from other routing functions.
Syntax Description
Default
Disabled.
direct Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
isis Specifies IS-IS routes.
NOTE: This option is only available on “i” series switches.
isis-level-1 Specifies IS-IS level 1 routes.
NOTE: This option is only available on “i” series switches.
isis-level-1-external Specifies IS-IS level 1 external routes.
NOTE: This option is only available on “i” series switches.
isis-level-2 Specifies IS-IS level 2 routes.
NOTE: This option is only available on “i” series switches.
isis-level-2-external Specifies IS-IS level 2 external routes.
NOTE: This option is only available on “i” series switches.
ospf Specifies all OSPF routes.
ospf-extern1 Specifies OSPF external route type 1.
ospf-extern2 Specifies OSPF external route type 2.
ospf-inter Specifies OSPF-inter area routes.
ospf-intra Specifies OSPF-intra area routes.
static Specifies static routes.
vip Specifies VIP routes.
NOTE: This option is only available on “i” series switches.
cost <number>t Specifies the
cost
metric, from 0-15. If set to 0, RIP uses the route metric
obtained from the route origin.
tag <number> Specifies a tag number.