Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1339 / 2620

configure wireless ports interface transmit-rate
ExtremeWare 7.7 Command Reference Guide 1339
configure wireless ports interface transmit-rate
configure wireless ports <portlist> interface [1 | 2] transmit-rate <rate>
Description
Configures a transmission rate for the specified port.
Syntax Description
Default
54 Mbps
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and
interface 2 supports 802.11b/g radio signals. The
configure wireless port interface
transmit-level
command allows you to configure the transmission rate for one of the two individual
interfaces (1|2) on a port or ports.
Valid transmission rate values are shown in Table 24.
Example
The following command configures the port 14 on a Summit 300-24 to transmit at 54 Mbps for both
interface 1 and 2 (A and G):
configure wireless port 14 interface 1 transmit-rate 54Mbps
configure wireless port 14 interface 2 transmit-rate 54Mbps
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
rate Specifies the transmission rate for the port. Entering auto specifies automatic transmission rate
selection. Valid values are shown in Table 24.
Table 24: Valid transmission rate values
Mode Valid Transmission Rate
A 6, 9, 12, 18, 24, 36, 48, 54, auto
B 1, 2, 5.5, 11, auto
G 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, auto