Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 379 / 2620

configure vlan add ports loopback-vid
ExtremeWare 7.7 Command Reference Guide 379
configure vlan add ports loopback-vid
configure vlan <vlan name> add ports <portlist> loopback-vid <vlan-id>
Description
Adds a loopback port to a VLAN.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
Untagged
Usage Guidelines
The VLAN must already exist before you can add or delete ports. Use the
create vlan
command to
create the VLAN.
You must configure a loopback port with a unique loopback VLAN tag ID before adding rate-shaped
ports.
This command is not supported on SONET modules.
Example
The following example sets up bi-directional rate shaping using a loopback port and a rate-shaped port.
First, create the VLAN that will have rate-shaped ports as members:
create vlan ratelimit
Create the loopback port to rate-shape ingress traffic:
configure vlan ratelimit add ports 1 loopback-vid 100
Configure the user port that will be rate-shaped:
configure vlan ratelimit add ports 2 soft-rate-limit
Configure rate-shaping to be at 5% maximum bandwidth for ingress and egress traffic:
configure qosprofile QP1 minbw 0 % maxbw 5 % priority low 1,2
vlan name Specifies a VLAN name.
port Specifies a loopback port for the VLAN.
vlan-id Specifies a unique loopback VLAN tag.