Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 304 / 2620

304 ExtremeWare 7.7 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
disable slot
disable slot [all | msm-a | msm-b | msm-s | msm-d | <slot number>]
Description
Disables one or all slots on a BlackDiamond or Alpine switch, and leaves the module in a power-down
state.
NOTE
This command is available only on the BlackDiamond and Alpine switches.
Syntax Description
Default
Enabled
Usage Guidelines
This command allows the user to disable a slot. When the user types this command, the I/O module in
that particular slot number is brought down, and the slot is powered down. The LEDs on the module
go OFF.
A disabled slot can be re-enabled using the
enable slot
command.
The
show slot
command, if invoked after the user disables the slot, shows this slot state as “Disabled.”
The user can either disable a slot individually or use the d
isable slot all
to disable all the slots.
If there is no I/O module present in a slot when the user disables the slot, the slot still goes to the
“Disable” state. If a module is inserted in a slot that has been disabled, the module does not come up
and stays in the “disabled” state until the slot is enabled by using the
enable slot
command. below.
If you do not save the configuration before you do a switch reboot, the slot will be re-enabled upon
reboot. If you save the configuration after disabling a slot, the slot will remain disabled after a reboot.
Example
The following command disables slot 5 on the switch:
disable slot 5
all Species that all slots in the device should be disabled.
msm-a Specifies that MSM-A should be disabled.
msm-b Specifies that MSM-B should be disabled.
msm-c Specifies that MSM-C should be disabled.
NOTE: This feature is only available only on the BlackDiamond 6816 switch.
msm-d Specifies that MSM-D should be disabled.
NOTE: This feature is only available only on the BlackDiamond 6816 switch.
slot number Specifies the slot to be disabled.