Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 887 / 2620

configure netlogin dot1x guest-vlan
ExtremeWare 7.7 Command Reference Guide 887
configure netlogin dot1x guest-vlan
configure netlogin dot1x guest-vlan <vlan-name> {ports <port-list>}
Description
This command configures a guest VLAN for 802.1x authentication netlogin.
Syntax Description
Default
N/A
Usage Guidelines
You must create a VLAN and configure it as a guest VLAN before you enable the guest VLAN feature.
Guest VLANs are supported only on wired ports.
If you do not specify any ports, the guest VLAN is configured for all ports.
Each port can have a different guest VLAN.
Example
The following example configures a guest VLAN named visit for all ports:
configure netlogin dot1x guest-vlan visit
The following example configures a guest VLAN named visit for ports 3 and 5:
configure netlogin dot1x guest-vlan visit ports 3,5
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms except the Altitude 300 Access Point.
vlan-name Specifies the name of the guest VLAN.
port-list Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8. If the ports keyword is not used, the command applies to all ports.