Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 388 / 2620

388 ExtremeWare 7.7 Command Reference Guide
VLAN Commands
configure vlan protocol
configure vlan <vlan name> protocol [<protocol_name> | any]
Description
Configures a VLAN to use a specific protocol filter.
NOTE
This command is available only on the “i” series switches and the Summit 400 series switches.
Syntax Description
Default
Protocol any
Usage Guidelines
If the keyword
any
is specified, all packets that cannot be classified into another protocol-based VLAN
are assigned to this VLAN as the default for its member ports.
Use the
configure protocol
command to define a custom protocol filter.
Example
The following command configures a VLAN named accounting as an IP protocol-based VLAN:
configure accounting protocol ip
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on the “i” series platforms and on the Summit 400 series switches.
vlan name Specifies a VLAN name.
protocol_name Specifies a protocol filter name. This can be the name of a predefined protocol filter or one you
have defined. The following protocol filters are predefined:
• IP
• IPX
• NetBIOS
• DECNet
• IPX_8022
• IPX_SNAP
• AppleTalk
any Indicates that this VLAN should act as the default VLAN for its member ports.