Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 297 / 2620

disable jumbo-frame ports
ExtremeWare 7.7 Command Reference Guide 297
disable jumbo-frame ports
disable jumbo-frame ports [<portlist> | all]
Description
Disables jumbo frame support on a port.
For PoS modules. This command applies to PoS ports when disabling jumbo-frame support changes
the negotiated maximum receive unit (MRU) size.
Syntax Description
Default
Disabled
Usage Guidelines
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
Use the
disable jumbo-frame ports
command when you no longer need jumbo frame support.
Example
The following command disables jumbo frame support on port 4 on a stand-alone switch:
disable jumbo-frame ports 4
The following command disables jumbo frame support on slot 1, port 2 on a BlackDiamond switch:
disable jumbo-frame 1:2
History
This command was first available in ExtremeWare 6.0.
This command was modified in ExtremeWare 6.1 to support PoS modules.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports on the switch.