Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 354 / 2620

354 ExtremeWare 7.7 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
If you do not specify a slot number, information for all slots is displayed.
For ARM, ATM, MPLS, PoS and WAN (E1, T1, and T3) modules: The ExtremeWare technology
release that supports these modules includes multiple software packages. One software package runs on
the MSM or SMMi module while another package runs on each ARM, ATM, MPLS, PoS, or WAN
module. You must download the software packages independently using the ExtremeWare
download
image
command. Each software package has an associated version number that you can display using
the
show version
command. It is recommended (not required), that the ExtremeWare software
package and the ARM, ATM, MPLS, PoS, or WAN module software package be the same version.
For ARM, ATM, MPLS and PoS modules: To ensure compatibility, the MSM performs an automatic
compatibility check before a ARM, ATM, MPLS or PoS module is activated. If the versions of the
software packages are incompatible, the ARM, ATM, MPLS or PoS ports on the module will not come
up and the
show slot
command will indicate that the software on the ARM, ATM, MPLS or PoS
module is incompatible with ExtremeWare.
Assuming the ARM, ATM, MPLS or PoS module has no problems, the command
show slot <slot>
(where “<slot>” is the number of the slot where you installed the module) displays that ExtremeWare
has detected the module and set it to the OPERATIONAL state.
Manager/Member Stacked Switches only:
Indicates whether the switch is a stack manager (master) or a member
(slave).
Primary ExtremeWare Version Stacked Switches only:
ExtremeWare version of the primary software image.
Secondary ExtremeWare Version Stacked Switches only:
ExtremeWare version of the secondary software image.
Image Selected Stacked Switches only:
The image selected on the switch.
Image Booted Stacked Switches only:
The running image of the switch.
Configuration Selected Stacked Switches only:
The configuration selected for the switch.
Configuration Booted Stacked Switches only:
The configuration that is active.
Primary Configuration Stacked Switches only:
The configuration saved as primary.
Secondary Configuration Stacked Switches only:
The configuration saved as secondary.
Configured Type The model number as configured by the user. This field is used to detect the
mismatches between the configured and actual model number.
Inline Power Power consumption.
UTP Ports Available
• Link Active
• Link Down
• GBIC Missing
Displays a list of ports. On stacked switches, the stacking ports are enclosed
in brackets. Port numbers with active and down links are listed.
Field Description