Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1264 / 2620

1264 ExtremeWare 7.7 Command Reference Guide
Troubleshooting Commands
Default
N/A
Usage Guidelines
Use this command to display the debug trace level configured for a particular system and VLAN. Some
of the debug trace systems commands can be applied to a particular VLAN, and some apply to the
switch as a whole. Therefore, the
vlan
option is not available with all systems.
Example
The following command displays the debug trace levels configured:
show debug-trace
Following is the output from this command:
OSPF SPF 3
Flowstats 3
Vlan Debug Level
---------------------------------------------------------------------------
v49 DVMRP route 3
Port Number Debug Level
---------------------------------------------------------------------------
No port-based debug-tracing configured
History
This command was first available in ExtremeWare 6.1.
Beginning in ExtremeWare 7.1.0, many debug trace facilities were moved to EMS.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
udp-forwarding Specifies UDP forwarding level.
NOTE: This option is available only on the “i” series switches.
vrrp Specifies VRRP level.
vrrp-hello Specifies VRRP hello level.
xp Specifies XP level.
NOTE: This option is available only on the “i” series switches.
wireless ports Specifies wireless ports debug trace level.
vlan name Specifies a VLAN name.