Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 242 / 2620

242 ExtremeWare 7.7 Command Reference Guide
Commands for Managing the Switch
show snmpv3 target-params
show snmpv3 target-params [{{hex <hex value>} | <param name>}]
Description
Display the information about the options associated with the parameter name.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries from the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
If no parameter name is specified, all the entries are displayed.
Example
The following command displays the target parameter entry named param1 :
show snmpv3 target-params param1
Output from the command is similar to:
Target Params Name : param1
MP Model : snmpv3
Security Model : USM
User Name : user1
Security Level : No-Authentication No-Privacy
Storage Type : NonVolatile
Row Status : Active
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
param name Specifies the parameter name to display.