Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 164 / 2620

164 ExtremeWare 7.7 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 add user clone-from
configure snmpv3 add user {hex <hex value>} <user name> clone-from {hex
<hex value>} <user name>
Description
Create a new user by cloning from an existing SNMPv3 user.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to create a new user by cloning an existing one. Once you have successfully cloned
the new user, you can modify its parameters using the following command:
configure snmpv3 add user {hex <hex value>}
<user name> {authentication [md5 |
sha] [hex <hex octet> | <password>]} {privacy [hex <hex octet> | <password>]}
{volatile}
Users cloned from the default users will have the storage type of non-volatile. The default names are:
admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv .
Example
Use the following command to create a user cloneMD5 with same properties as the default user
initalmd5 . All authorization and privacy keys will initially be the same as with the default user
initialmd5 .
configure snmpv3 add user cloneMD5 clone-from initialmd5
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
user name Specifies the user name to add or to clone from.