Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 749 / 2620

disable sflow backoff-threshold
ExtremeWare 7.7 Command Reference Guide 749
disable sflow backoff-threshold
disable sflow backoff-threshold
Description
Disables the sFlow backoff-threshold feature, which limits the maximum number of packets sent to the
sFlow collector per second.
NOTE
This command is available only on the “i” series switches.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
This command disables the backoff threshold feature, which is used to limit the number of packets sent
to the sFlow collector in a second. To set the backoff threshold, use the following command:
configure sflow backoff-threshold
If the number of packets sent to the collector exceeds the limit set by the
configure sflow
backoff-threshold
command, the sampling rate is doubled.
The backoff threshold is enabled when the
enable sflow backoff-threshold
command is executed
and the sample rate set by the
configure sflow sample-rate
command is greater than 0 (zero).
Example
The following command disables the sFlow backoff threshold feature:
disable sflow backoff-threshold
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available only on the “i” series platforms.