Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1401 / 2620

show wireless ports interface ap-scan results mac-address
ExtremeWare 7.7 Command Reference Guide 1401
show wireless ports interface ap-scan results
mac-address
show wireless ports [all | <portlist>] interface [1 | 2] ap-scan results
<mac-address>
Description
Displays information about an access point (AP) whose MAC address is selected from the AP scan
results table.
Default
N/A
Usage Guidelines
Use this command to get information about an AP using its MAC address.
Example
The following example display information about an AP by MAC address:
show wireless ports 1:8 interface 2 ap-scan results 00:04:96:5:80:B0:
The output of the command is similar to:
AP Mac Address Intf ESS Name AvgRSS Type Chan WEP WPA Last
================================================================================
00:04:96:05:80:B0 1:8:2 Extreme_g 8 bss 11 Y 23:53:34
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
mac-address Specifies the MAC address selected from the AP scan results table.