Intel Active Management Technology v5.0 Скачать руководство пользователя страница 1

Страница: 1 / 143

Intel® Active Management Technology v5.0

Administrator's Guide

Overview

Product Overview

Operational Modes

Setup and Configuration Overview

Provisioning Methods

Menus and Defaults

MEBx Settings Overview

ME Configuration Menu

AMT Configuration Menu

Intel Fast Call for Help

MEBx Defaults

Setup and Configuration

Methods Overview

Configuration Service--Using a USB Device

Configuration Service--USB Device Procedure

MEBx Interface--Enterprise Mode

MEBx Interface--SMB Mode

System Deployment

Operating System Drivers

Management

Intel AMT Web GUI

AMT Redirection (SOL/IDE-R)

AMT Redirection Overview

Troubleshooting

Troubleshooting

If you purchased a DELL™ n Series computer, any references in this document to Microsoft

Windows

operating systems

are not applicable.

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, Latitude, and the DELL logo are trademarks of Dell Inc.; Intel is a registered trademark of Intel Corporation in

the U.S. and other countries; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

October 2008 Rev. A00

Содержание Active Management Technology v5.0
















































































































































Результаты поиска

Содержание Active Management Technology v5.0

Отзывы:

Похожие инструкции для Active Management Technology v5.0

Бренды по названию

Популярные бренды

Intel Active Management Technology v5.0, Руководство администратора

Результаты поиска

Содержание Active Management Technology v5.0

Отзывы:

Похожие инструкции для Active Management Technology v5.0

Бренды по названию

Популярные бренды