Intel Active Management Technology v5.0, Руководство администратора

Страница: 141 / 143

Back to Contents Page
Intel AMT WebGUI
The Intel® AMT WebGUI is a Web browser-based interface for limited remote computer management. The WebGUI is often
used as a test to determine if Intel AMT setup and configuration was performed properly on a computer. A successful remote
connection between a remote computer and the host computer running the WebGUI indicates proper Intel AMT setup and
configuration on the remote computer.
The Intel AMT WebGUI is accessible from any Web browser, such as the Internet Explorer® or Netscape® applications.
Limited remote computer management includes:
Hardware inventory
Event logging
Remote computer reset
Changing of network settings
Addition of new users
WebGUI support is enabled by default for SMB setup and configured computers. WebGUI support for Enterprise setup and
configured computers is determined by the setup and configuration server. Information on using the WebGUI interface is
available on the Intel AMT website .
An older version of the WebGUI interface is available at Intel AMT Small Business Administrator's Guide under Using the Web
Browser Interface on page 4.
Follow the steps below to connect to the Intel AMT WebGUI on a computer that has been configured and set up :
1. Turn on an Intel AMT capable computer that has completed Intel AMT setup and configuration.
2. Launch a Web browser from a separate computer, such as a management computer on the same subnet as the Intel
AMT computer.
3. Connect to the IP address specified in the MEBx and port of the Intel AMT capable computer. (example:
http://ip_address:16992
or
http://192.168.2.1:16992
)
By default, the port is 16992. Use port 16993 and https:// to connect to the Intel AMT WebGUI on a computer
that has been configured and set up in the Enterprise mode.
If DHCP is used, then use the fully qualified domain name (FQDN) for the ME. The FQDN is the combination of
the host name and domain. (example:
http://host_name:16992
or
http://system1:16992
)
The management computer makes a TCP connection to the Intel AMT capable computer and accesses the top level
Intel AMT-embedded Web page within the Management Engine of the Intel AMT capable computer.
4. Type the username and password. The default username is
admin
and the password is what was set during Intel AMT
setup in the MEBx.
5. Review the computer information and make any necessary changes.
You can change the MEBx password for the remote computer in the WebGUI. Changing the password in the WebGUI or a
remote console results in two passwords. The new password, known as the remote MEBx password, only works remotely with
the WebGUI or remote console. The local MEBx password used to locally access the MEBx is not changed. You have to
remember both the local and remote MEBx passwords to access the computer MEBx locally and remotely. When the MEBx
password is initially set in Intel AMT setup, the password serves as both the local and remote password. If the remote
password is changed, then the passwords are out of sync.
6. Select Exit .
Back to Contents Page