Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 697 / 2620

configure log target format
ExtremeWare 7.7 Command Reference Guide 697
• severity—on
• event-name—condition
• host-name—off
• priority—off
• tag-id—off
• tag-name—off
• sequence-number—off
• process-name—off
• process-id—off
• source-function—off
• source-line—off
The following defaults apply to syslog targets (per RFC 3164):
• timestamp—seconds
• date—mmm-dd
• severity—on
• event-name—none
• host-name—off
• priority—on
• tag-id—off
• tag-name—on
• sequence-number—off
• process-name—off
• process-id—off
•
source-function—off
• source-line—off
Usage Guidelines
This command configures the format of the items that make up log messages. You can choose to
include or exclude items and set the format for those items, but you cannot vary the order in which the
items are assembled.
When applied to the targets
console-display
or
session
, the format specified is used for the
messages sent to the console display or telnet session. Configuration changes to the
session
target, be it
either a telnet or console display target session, are in effect only for the duration of the session, and are
not saved in FLASH.
When this command is applied to the target
memory-buffer
, the format specified is used in subsequent
show log
and
upload log
commands. The format configured for the internal memory buffer can be
overridden by specifying a format on the
show log
and
upload log
commands.
When this command is applied to the target
syslog
, the format specified is used for the messages sent
to the specified syslog host.