Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1883 / 2620

enable ospf export static
ExtremeWare 7.7 Command Reference Guide 1883
enable ospf export static
For “i” series switches:
enable ospf export static [cost <metric> [ase-type-1 | ase-type-2] {tag
<number>} | <route map>]
For “e” series switches:
enable ospf export static [cost <metric> [ase-type-1 | ase-type-2] {tag
<number>}]
Description
Enables the redistribution of static routes to OSPF.
Syntax Description
Default
The default tag number is 0. The default setting is disabled.
Usage Guidelines
After it is enabled, the OSPF router is considered to be an ASBR.
This command enables the redistribution of static routes by way of LSA to other OSPF routers as
AS-external type 1 or type 2 routes.
The cost metric is inserted for all BGP, VIP, RIP-learned, static, and direct routes injected into OSPF. The
tag value is used only by special routing applications. Use 0 if you do not have specific requirements for
using a tag. The tag value in this instance has no relationship with 802.1Q VLAN tagging.
Example
The following command enables the exporting of static routes to OSPF:
enable ospf export static cost 0 ase-type-1 tag 0
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
metric Specifies a cost metric.
ase-type-1 Specifies AS-external type 1 routes.
ase-type-2 Specifies AS-external type 2 routes.
number Specifies a tag value.
route map Specifies a route map name.
NOTE: This option is only available on “i” series switches.