Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 698 / 2620

698 ExtremeWare 7.7 Command Reference Guide
Commands for Status Monitoring and Statistics
Timestamps. A timestamp refers to the time an event occurred. Timestamps can be output either in
seconds, as described in RFC 3164 (for example, “13:42:56”), or in hundredths of a second (for example,
“13:42:56.98”). They can also be suppressed altogether. To display timestamps as hh:mm:ss, use the
seconds
keyword; to display as hh:mm:ss.HH, use the
hundredths
keyword. To suppress timestamps
altogether, use the
none
keyword. Timestamps are displayed in hundredths by default.
Date. The date an event occurred can be output as described in RFC 3164. Dates are output in different
formats, depending on the keyword chosen. The following lists the
date
keyword options, and how the
date “March 26, 2003” would be output:
•
Mmm-dd
—Mar 26
•
mm-dd-yyyy
—03/26/2003
•
dd-mm-yyyy
—26-03-2003
•
yyyy-mm-dd
—2003-03-26
•
dd-Mmm-yyyy
—26-Mar-2003
Dates are suppressed altogether by specifying
none
. Dates are displayed as
mm-dd-yyyy
by default.
Severity. A four-letter abbreviation of the severity of the event can be output by specifying
severity
on
or suppressed by specifying
severity off
. The default setting is
severity on
. The abbreviations
are: Crit, Erro, Warn, Noti, Info, Summ, Verb, and Data. These correspond to: Critical, Error, Warning,
Notice, Informational, Debug-Summary, Debug-Verbose, and Debug-Data.
Event Names. An event name can be output in the following ways:
• As the component name alone by specifying
event-name component
• As component and subcomponent name by specifying
event-name subcomponent
• As component and subcomponent name with condition mnemonic by specifying
event-name
condition
Event names can be suppressed by specifying
event-name none
.
The default setting is
event-name condition
to specify the complete name of the events.
Host Name. The configured SNMP name of the switch can be output as HOSTNAME described in
RFC 3164 by specifying
host-name on
or suppressed by specifying
host-name off
. The default
setting is
host-name off
.
Tag ID. The (internal) ExtremeWare task identifiers of the applications detecting the events can be
output as the pid described in RFC 3164 by specifying
tag-id on
or suppressed by specifying
tag-id
off
. The default setting is
tag-id off
.
Tag Name. The component name used by the application when detecting the events can be output as
the tag described in RFC 3164 by specifying
tag-name on
or suppressed by specifying
tag-name off
.
The default setting is
tag-name off
.
Sequence Number. Sequence numbers refer to the specific ordering of events as they occur. They can
be output as an ASCII decimal integer by specifying
sequence-number on
or suppressed by specifying
sequence-number off
. The default setting is
sequence-number off
.