Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 1600 / 2620

1600 ExtremeWare 7.7 Command Reference Guide
STP Commands
configure stpd ports mode
configure stpd <spanning tree name> ports mode [dot1d | emistp | pvst-plus]
<portlist>
Description
Configures the STP mode of operation for the specified port list.
Syntax Description
Default
Ports in the default STPD (s0) are
dot1d
mode. Ports in user-created STPDs are in
emistp
mode.
Usage Guidelines
None
Examples
The following command configures STPD s1 with PVST+ packet formatting for port 1 on a stand-alone
switch:
configure stpd s1 ports mode pvst-plus 1
The following command configures STPD s1 with PVST+ packet formatting for slot 2, port 1 on a
modular switch:
configure stpd s1 ports mode pvst-plus 2:1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
spanning tree name Specifies an STPD name on the switch.
dot1d Specifies IEEE 802.1d-compliant packet formatting. A physical port can only be a member
of one STPD running it
dot1d
mode.
emistp Specifies 802.1d formatting and 802.1q tagging.
pvst-plus Specifies PVST+ packet formatting.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots
and ports. On a stand-alone switch, can be one or more port numbers. May be in the form
1, 2, 3-5, 2:*, 2:5, 2:6-2:8.