Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 234 / 2620

234 ExtremeWare 7.7 Command Reference Guide
Commands for Managing the Switch
show snmpv3 filter
show snmpv3 filter {{hex <hex value>} <profile name> {{subtree} <object
identifier>}
Description
Display the filters that belong a filter profile.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries from the snmpNotifyFilterTable. If you specify a profile name and
subtree, you will display only the entries with that profile name and subtree. If you specify only the
profile name, you will display all entries for that profile name. If you do not specify a profile name,
then all the entries are displayed.
Example
Use the following command to display the part of filter profile filter1 that includes the MIB subtree
1.3.6.1.1.2 :
show snmpv3 filter filter1 subtree 1.3.6.1.1.2
Output from the command is similar to:
Filter Profile Name : filter1
Subtree : 1.3.6.1.1.2
Mask :
Type : Included
Storage Type : NonVolatile
Row Status : Active
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
profile name Specifies the filter profile to display.
object identifier Specifies a MIB subtree.