Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 2404 / 2620

2404 ExtremeWare 7.7 Command Reference Guide
Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
unconfigure inline-power operator-limit ports
unconfigure inline-power operator-limit ports <portlist>
Description
Resets the operator limit back to the default for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
Default
The default operator limit is 15400 mW.
Usage Guidelines
This command resets the operator limit that was configured with the following command:
configure inline-power operator-limit <milliwatts> ports <portlist>
The Summit 300-24 or 400-24p switch has an operator limit range of 300 to 15400 milliwatts. The
Summit 300-48 switch has an operator limit range of 300 to 20000 milliwatts.
Example
The following command resets the operator limit to its default for port 2 on slot 1:
unconfig inline-power operator-limit ports 1:2
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.