Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 639 / 2620

show flow-redirect
ExtremeWare 7.7 Command Reference Guide 639
show flow-redirect
show flow-redirect <flow redirect>
Description
Displays the current configuration and statistics for flow redirection.
Syntax Description
Default
N/A
Usage Guidelines
If you do not specify a flow redirection policy, configuration and statistics for all flow redirection
policies are displayed.
The following fields are displayed:
flow redirect Specifies a flow redirection policy.
Service Check
Timer Settings: Displays the frequency and timeout settings for the flow redirection ping check, TCP port
check, and service check.
Flow IPSA Mode Displays the IP source address mode:
• Enumeration Mode—The default mode, used for network masks from /32 to /20.
• Subnet Mode—Used for network masks from /19 to /1.
The mode is selected automatically when you specify a network mask.
Proto: Displays the flow type.
• any—Forwards any traffic over any IP port.
• tcp—Forwards TCP traffic over a single IP port.
• tup—Forwards both TCP and UDP traffic over a single IP port.
• udp—Forwards UDP traffic over a single IP port.
Dest: Displays the destination IP address.
L4-src-port: Displays the source port number.
Enabled: Displays the status of flow redirection.
• Yes—Flow redirection is enabled.
• No—Flow redirection is not enabled.
Source: • Displays the source IP address.
# Servers Up: Displays the number of next hops up over the number of next hops configured.