Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 880 / 2620

880 ExtremeWare 7.7 Command Reference Guide
Security Commands
configure enhanced-dos-protect ports
configure enhanced-dos-protect ports [trusted | untrusted] <portlist>
Description
Configures ports as trusted, so that enhanced denial of service protection is not applied to the ports; or
configures ports as untrusted, so that enhanced denial of service protection is applied to the ports.
Syntax Description
Default
By default, ports are trusted.
Usage Guidelines
You can configure each port as trusted or untrusted . A trusted port behaves as a normal port. An
untrusted port behaves according to the configuration parameter used in IPFDB thrashing.
To verify the status of each port, use the following command:
show enhanced-dos-protect [rate-limit | ipfdb] ports <portlist>
Example
The following command configures a range of ports as trusted, so that enhanced denial of service
protection is not applied to ports 2 through 4:
configure enhanced-dos-protect ports trusted 2-4
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
trusted Specifies the selected ports as trusted, so that enhanced denial of service is not applied to
the ports.
untrusted Specifies the selected ports as untrusted, so that enhanced denial of service is applied to
the ports.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:*, 2:5, 2:6-2:8.