Extreme Networks ExtremeWare 7.7, Справочник по командам

Страница: 2440 / 2620

2440 ExtremeWare 7.7 Command Reference Guide
LLDP Commands
show lldp ports
show lldp ports [all | <portlist>] {detailed}
Description
Displays LLDP configuration information for the specified port or ports. The
detailed
keyword is used
to show the configured VLANs on the port and the enabled VLAN specific TLVs.
Syntax Description
Default
N/A.
Usage Guidelines
N/A.
Example
The following example displays LLDP configuration information for port 5:23.
# show lldp ports 5:23
LLDP Configuration
Advertised Interval : 30 seconds
Hold Value : 4
Transmit Delay : 2 seconds
Notification Interval : 5 seconds
Re-init Delay : 2 seconds
Port Tx Rx SNMP Optional enabled transmit TLVs
State State Notification LLDP 802.1 802.3
======================================================================================
5:23 ENABLED ENABLED DISABLED PNDCM NPp- ----
======================================================================================
U->page up D->page down ESC->exit
Flags: (P) Port Description, (N) System Name, (D) System Description
(C) System Capabilities, (M) Mgmt Addr
802.1 Flags: (P) Port VLAN ID, (p) Port & Porocotol VLAN ID, (N) VLAN Name
all Applies to all ports on the switch.
portlist Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
detailed Shows information on the configured VLANs on the port.