The WAN Port Software Menu
Page 28-24
TOS for Voice Signaling Data
Set the priority for voice signaling data streams. The value must be entered in hexadecimal
format translated from binary, and can use either IP Precedence or Differentiated Services
Code Point (DSCP). Enter
0
to disable this feature. See
Type of Service (ToS)
on page 28-2
above for a more detailed explanation of ToS.
TOS Mask for both TOS Value
Set the mask bits for both voice data and signaling data. Enter
0
to disable this feature.
Signaling IP Address
When a data frame cannot be identified by the ToS voice data or ToS signaling data, the
Signaling IP Address is checked. Matched frames are loaded on a High Priority Software
Queue and a Nominal Hardware Queue.
Signaling IP Mask
The mask associated with the Signaling IP Address described above.
Fractional T1 Port Example
In this example: port 1 on slot 3 is a fractional T1 port using Frame Relay. To modify
fractional T1 port 2/1, enter:
wpm 3/1
A screen similar to following displays:
1) Admin Status .................................................................................. UP
{(U)p, (D)own}
2) Speed in BPS .................................................................................. 1544000
3) Clocking ......................................................................................... Local
4) Protocol Type ................................................................................. Frame Relay
{(F)rame Relay, (P)PP(Point to Point)}
5) T1 Starting Time Slot ...................................................................... 1
{T1 (1..24)}
6) T1 Number of Time Slots ................................................................ 23
{T1 (1..24)}
8) TOS for Voice Data ........................................................................ a0
TOS Value in Hex for Voice Data, 0 to disable TOS
9) TOS for Voice Signaling Data ......................................................... 60
TOS Value in Hex for Voice Signaling Data, 0 to disable TOS
10)TOS Mask for both TOS Value .........................................................e0
TOS Mask in Hex for Type of Data
11) Signaling IP Address ..................................................................... 0.0.0.0
IP Address range
12) Signaling IP Mask .......................................................................... 255.255.255.255
IP Mask range
15) Loopback Timeout .........................................................................10
{Timeout (0..255)}
(save/quit/cancel)
:
Содержание Omni Switch/Router
