Alcatel Omni Switch/Router, Руководство пользователя

Страница: 793 / 1100

Viewing the IPX Routing Table
Page 27-5
Viewing the IPX Routing Table
The
ipxr
command is used to display the IPX Routing Table. The entries in the table show the
routes entered by the IPX
RIP
protocol and the static routes that you may have entered manu-
ally. All entries in the table are sorted by destination network. The IPX Routing Table can
contain a maximum of 2,010 routes.
Displaying All Entries in the IPX Routing Table
To display all entries in the IPX Routing Table, enter the following command:
ipxr
A screen similar to the following displays:
Displaying all (4) routes:
Dest Net Router Hops Delay Static Aged Redir Chg Dir GP:VL
3333 e8024.0000c021a5b8 1 3 N Y N N N 7:1
5555 5555.Direct 0 1 N N N N Y 4:1
e8024 e8024.Direct 0 1 N N N N Y 7:1
3041c204 e8024.0000c021a5b8 1 3 N Y N N N 7:1
The fields on this screen have the following meanings:
Dest Net
The destination network IPX address.
Router
The IPX address (network.node) of the next hop router to reach the destination network.
Hops
The number of routers between this node and the destination network.
Delay
The number of “ticks” between this node and the destination network. A “tick” is about 1/
18th of a second.
Static
Whether this route was statically defined (see the
aipxsr
command).
Aged
Indicates if this route has timed out. Once a route times out it is kept in the routing table for
10 “ticks.” Once the 10 “ticks” expire, the route is deleted.
Redir
Indicates that a route to an IPX network that was formerly reachable via a direct interface has
been replaced by an alternate route.