Alcatel Omni Switch/Router, Руководство пользователя

Страница: 286 / 1100

NTP Configuration Menu
Page 12-8
Configuring an NTP Client/Server
A switch can be configured to act both as a client and a server. If you want to run both the
client and server portions of the
NTP
software, follow the steps below:
1. Enter the command as shown, at the system prompt:
ntpiconfig
The following menu appears:
NTP Startup Configuration
1) Response timeout : 0
2) Authentication delay : No
3) Authentication key file name : UNSET
4) NTP client mode : Ucast
5) Enable monitor : No
6) Enable NTP server : No
2. Adjust the configurable variables for this
NTP
client as needed by entering the line
number, and equal sign, and a new value at the system prompt, as shown:
<lineNumber>=<value>
For example, to change the
Response timeout
to 10, you would enter
1
(the line number
for
Response timeout
), an equal sign (
=
), and the number
10
(the new value), as shown:
1=10
3. Enable the
NTP
server by entering a
6
, an equal sign (
=
), and
yes
at the prompt, as shown:
6=yes
The
NTP
Startup Configuration menu expands to display new options. The menu now
appears similar to the following:
NTP Startup Configuration
1) Response timeout : 0
2) Authentication delay : No
3) Authentication key file name : UNSET
4) NTP client mode : Ucast
5) Enable monitor : No
6) Enable NTP server : No
61) Client limit : 3
62) Client limit period : 3600
63) Enable server authentication : No
64) Advertised precision : -7
65) Broadcast delay : 0
4. Adjust the configurable variables for this
NTP
server as needed by entering the line
number, and equal sign, and a new value at the system prompt, as shown:
<lineNumber>=<value>
For example, to change the
Client limit
to 10, you would enter
61
(the line number for
Client limit
), an equal sign (
=
), and the number
10
(the new value), as shown:
61=10