Alcatel Omni Switch/Router, Руководство пользователя

Страница: 926 / 1100

Resetting Statistics Counters
Page 29-54
Resetting Statistics Counters
You can reset the statistics counters for a single
WSX
board, a
WSX
port, or a specific
DLCI
.
The statistics that are cleared on those that are displayed through the
frstatus
commands. The
frclear
command is used to reset statistics.
Resetting Statistics for a WSX Board
To reset statistics on a single
WSX
board, enter the
frclear
command along with the slot
number for the
WSX
board, as follows:
frclear <slot>
where
<slot>
is the slot number where the
WSX
board is installed. For example, if you wanted
to clear statistics for the board in slot 4, you would enter:
frclear 4
or
frc 4
Resetting Statistics for a WSX Port
To reset statistics on a single
WSX
port, enter the
frclear
command along with the slot number
for the
WSX
board and the port number as follows:
frclear <slot>/<port>
where
<slot>
is the slot number where the
WSX
board is installed and
<port>
is the port
number on the
WSX
board. For example, if you wanted to reset statistics for Port 1 on the
WSX
module in Slot 4, you would enter:
frclear4/1
or
frc 4/1
Resetting Statistics for a Virtual Circuit (DLCI)
To reset statistics on a single virtual circuit, you enter the
frclear
command along with the slot
number for the
WSX
board, the port number, and
DLCI
number for the virtual circuit on which
you want to reset statistics, as follows:
frclear <slot>/<port>/<DLCI>
where
<slot>
is the slot number where the
WSX
board is installed,
<port>
is the port number
on the
WSX
board, and
<DLCI>
is the
virtual circuit identifi
er. For example, if you wanted to
reset statistics for the board in slot 4, port 1,
DLCI
32, you would enter:
frclear 4/1/32
or
frc 4/1/32