Alcatel Omni Switch/Router, Руководство пользователя

Страница: 607 / 1100

Port Monitoring
Page 19-65
Ending a Port Monitoring Session
After you quit a port monitoring session, the default directory changes to
/ram
and the current
files on the
RAM
drive are listed. The screen below shows an example of the display at the
completion of a monitoring session.
Port monitoring capture done. Current capture files listed:
Current working directory ‘/ram’.
PM0302.ENC 65536 10/20/96 12:12
PM0303.ENC 32768 10/20/96 11:15
950272 bytes free
Viewing Port Monitoring Statistics (pmstat)
The
pmstat
command displays the statistics gathered for the current or most recent port moni-
toring session. If a port monitoring session is currently in progress, then it displays the results
of the in-progress session. If a port monitoring session is not in progress, then it displays
results of the most recently completed session. To view session statistics, enter
pmstat
A screen similar to the following displays:
Viewing capture statistics:
Percent RAM available: 96%
Frame type
#Frames
------------------ --------------
Broadcast 108
Multicast 253
Unicast 301
The
Percent RAM available
indicates how much of the configured
RAM
disk has been used by
this port monitoring session. You can configure the size of the
RAM
disk through the
pmcfg
command; the default size is
1 MB
. The remaining items in the display show the number of
packets passed on the port broken down into broadcast, multicast, and unicast frames.