Yamaha YZ125(R)/LC, Owner'S Service Manual

Page: 284 / 568

4-36
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
EC495122
Push lever
1. Install:
9 Torsion spring
1
9 Push lever
2
To push lever axle
3
.
NOTE:
Temporarily install the torsion spring and push
lever at this point.
2. Check:
9 Push lever position
NOTE:
When pushing the push lever forward, alignment
mark
b
should be positioned between area
a
.
If not, reinstall the push lever.
3. Adjust:
9 Push lever position
10. Install:
9 Clutch cover
1
9 Bolt (clutch cover)
2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
10 Nm (1.0 m•kg, 7.2 ft•lb)
Adjustment steps:
9
Remove the push lever 1 from the push
lever axle 2 .
9
Re-install the push lever so that the projec-
tion is positioned between alignment marks
when pushing the push lever forward.
9. Install:
9
Gasket (clutch cover) 1
NOTE:
Position the rack
a
on the push rod backward.