Yamaha YZ125(R)/LC, Owner'S Service Manual

Page: 38 / 568

1-7
GEN
INFO
SPECIAL TOOLS
EC140002
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised tech-
niques. The shape and part number used for the special tool differ by country, so two types are provid-
ed. Refer to the list provided to avoid errors when placing an order.
NOTE:
9 For U.S.A. and Canada, use part number starting with “YM-”, “YU-” or “ACC-”.
9
For others, use part number starting with “90890-”.
Part number Tool name / How to use IIIustration
YU-1135-A, 90890-01135 Crankcase separating tool
YU-1135-A 90890-01135
These tool is used to split the crankcase as well
as remove the crankshaft from either case.
YM-1189, 90890-01189 Flywheel puller
YM-1189 90890-01189
This tool is used to remove the flywheel magneto.
YU-1235, 90890-01235 Rotor holding tool
YU-1235 90890-01235
This tool is used when loosening or tightening the
flywheel magneto securing nut.
YU-3097, 90890-01252 Dial gauge and stand
YU-3097 90890-01252
YU-1256 Spark plug hole dial stand
YU-1256
These tools are used to set the ignition timing.
Crankcase installing tool
YU-90050 90890-01274
YU-90050, 90890-01274 Pot
YU-90062 90890-01275
YU-90050, 90890-01275 Bolt
90890-01277
YU-90062, 90890-01277 Adapter
These tools are used to install the crankshaft.
YU-1304, 90890-01304 Piston pin puller
YU-1304 90890-01304
This tool is used to remove the piston pin.
YM-1312-A, 90890-01312 Fuel level gauge
YM-1312-A 90890-01312
YM-01470, 90890-01470 Fuel level gauge adaptor
YM-01470 90890-01470
This gauge is used to measure the fuel level in the
float chamber.