Yamaha YZ125(R)/LC, Owner'S Service Manual

Page: 372 / 568

5-6
CHAS
FRONT WHEEL AND REAR WHEEL
5. Install:
9 Wheel axle
1
NOTE:
Apply the lithium soap base grease on the wheel
axle.
6. Install:
9 Nut (wheel axle)
1
7. Tighten:
9 Bolt (axle holder)
1
NOTE:
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork several
times with the front brake applied.
8. Install:
9
Brake hose 1
To brake hose holder 2 .
NOTE:
Before tightening the bolt (brake hose holder),
align the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose in front of the axle boss
c
and fit it
into the hose groove
d
so that the brake hose
does not contact the nut (wheel axle).
105 Nm (10.5 m•kg, 75 ft•lb)
23 Nm (2.3 m•kg, 17 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)