Yamaha YZ125(R)/LC, Owner'S Service Manual

Page: 404 / 568

3. Install:
9
Spring 1
9
Brake pedal 2
9
O-ring 3
9
Bolt (brake pedal) 4
9 Clip
5
NOTE:
9
Apply the lithium soap base grease on the
bolt, O-ring and brake pedal bracket.
9
Install the clip with its stopper portion
a
fac-
ing inward.
5-22
CHAS
FRONT BRAKE AND REAR BRAKE
26 Nm (2.6 m•kg, 19 ft•lb)
EC5A5911
Front brake hose
1. Install:
9 Brake hose
1
To brake hose holder
2
.
NOTE:
Before tightening the bolt (brake hose holder),
align the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose in front of the axle boss
c
and fit it
into the hose groove
d
so that the brake hose
does not contact the nut (wheel axle).
2. Install:
9 Hose cover
1
9 Plain washer
2
9 Bolt [hose cover (M8)]
3
9 Bolt [hose cover (M6)]
4
10 Nm (1.0 m•kg, 7.2 ft•lb)
16 Nm (1.6 m•kg, 11 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
4. Install:
9 Pin
1
9 Plain washer
2
9 Cotter pin
3
NOTE:
After installing, check the brake pedal height.
Refer to “REAR BRAKE ADJUSTMENT” section
in the CHAPTER 3.